For 1997-06 xk x100 and 1998-03 xj x308 with cd changer (11 pages)
Summary of Contents for Discount Car Stereo CTS-HF
Page 1
Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 CTS-HF QUICK START INSTALLATION GUIDE FOR CADILLACE CTS/SRX WITH XM TUNER MODULE...
(Siri, Google Now, Assistant etc.) initiate phone calls, Using a panel removal tool, unclip and remove A/C Control/ash tray launch applications or XM playback (if subscribed). Thanks to the CTS-HF Kit, the assembly below the radio (See Fig. 2) original radio, XM subscription is retained in addition to Bluetooth features only available on newer cars.
Page 3
Remove the (4) 10mm screws securing radio to the dash (See Fig. 3) Fig. 5 Connect installation harness 8-pin plug (black) (See Fig. 6) to radio chamber vacated in step 6. Fig. 3 Pull radio forward to reveal the connectors (See Fig. 4) Fig.
Page 4
12V Accessory Warning: Radio in Bose systems may not be able to provide enough current to power both amplifier and module in which case module will connect/disconnect at random in which case red accessory wire Fig. 6a must be used to connect module to an alternate location. If Fig.
Page 5
Consider where to install push button/microphone. Keep in mind the control button must be within drivers reach and facing for voice commands and phone dialog (cable is 6ft. long). We recommend completing the rest of the install prior to securing the control/mic button to the dash.
Insert USB cable through hole in bracket (See Fig. 17) and connect to Module USB port (See Fig. 13) Fig. 14 Flush mount USB Terminal Fig. 17 Snap USB head to panel until flush with mounting surface (See Fig. 18) Fig.
Bluetooth pairing and connection Operation This process is required upon initial. After initial pairing, the CTS-HF will automatically reconnect with the paired phone upon entering the vehicle. Press “BAND” button on radio until XM is displayed Use radio volume control to set playback level Turn the vehicle ignition to “ON”.