Step 5
You will need
16 x Cam Nuts
Phillips Head
(H4)
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Attach Rails (P5x2) and (P4x2)
to Top Panel (P1). Insert 16 x
Cam Nuts (H4) into Rails (P5x2),
Rails (P4x2), Legs (P3x2) and
(P4x2) secure by tightening Cam Nuts
(H4) with a Phillips Head Screwdriver.
Step 6
You will need
4 x Bracket
8 x Screws
(H2)
(H10)
Phillips Head
Screwdriver
Attach 4 x Bracket (H2) to Rails (P5x2) and Legs and secure with 8 x Screws (H10)
by tightening with a Phillips Head Screwdriver.
fantasticfurniture.com.au
Two People
(P2)
Required
(P4)
(P5)
H2
H10
(P4)
(P5)
(P3)
(P5)
H4
(P3)
(P4)
(P1)
H2
(P5)
H10
(P1)
(P4)
(P2)
Page 7