Advertisement
Step 9
You will need
8 x Cam Nuts
Phillips Head
(H4)
Screwdriver
8 x Dowels
(H1)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Top Panel (P1) to Left Side Panel (P2), Right Side Panel (P3), Shelf Panel
(P7) and Shelf Panel (P8) with 8 x Dowels (H1) and secure with 8 x Cam Nuts (H4).
Tighten with a Phillips Head Screwdriver.
Step 10
You will need
2 x Screws
Phillips Head
(H17)
Screwdriver
Press Shelf Panel (P12) against Right Side Panel (P3), then slide Shelf Panel
(P12) between Shelf Panel (P6) and Top Panel (P1) to form the unit as shown.
Attach Shelf Panel (P12) to Right Side Panel (P3) with 2 x Screws (H17).
Tighten with a Phillips Head Screwdriver.
fantasticfurniture.com.au
(P1)
(P7)
(P2)
(P1)
H1
H4
(P8)
H4
(P3)
(P12)
H17
(P6)
(P12)
(P6)
(P3)
H1
(P3)
PAGE 9
Advertisement
