Advertisement
Step 15
You will need
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach Drawer Sides (P19, P20) to Drawer Front (P17). Insert 4 x Cam Nuts (H4) into the holes
of Drawer Sides (P19, P20). Make sure the opening on cam nuts point towards the incoming
cam bolts. Tighten with a Phillips Head Screwdriver.
Step 16
Slide the Drawer Base (P21) into the grooves between drawer sides as shown.
Step 17
You will need
4 x Screws
Phillips Head
(H17)
Screwdriver
Attach Drawer Back (P18) to Drawer Sides (P19, P20) with 4 x Screws (H17),
make sure that the groove lines up the whole way around the drawer.
Tighten with a Phillips Head Screwdriver.
fantasticfurniture.com.au
(P19)
(P17)
(P21)
(P19)
(P19)
(P20)
H4
Ensure laminated
side of panel is
facing inwards.
(P20)
(P18)
H17
(P20)
H4
PAGE 12
Advertisement
