Job Complete - fantastic furniture Hamilton Coffee Table Rectangle Quick Start Manual

Step 5
You will need
6 x Long 4 x Cam Nuts
Screws (H4) (H6)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4 x Cam Nuts (H6) into Side Panels (P2x2) as shown. Rotate the cam nuts so the arrow
points towards the incoming cam bolts. Attach Rails (P4x2) and Side Panels (P2x2) to Top
Panel (P1) with 6 x Long Screws (H4) by tightening with the Phillips Head Screwdriver.
In the interest of our environment please dispose of all packaging thoughtfully.
fantasticfurniture.com.au fantasticfurniture.com.au
(P4)

Job Complete!

(P1)
(P4)
Page 7