fantastic furniture Pod Storage Box Quick Start Manual page 5

Step 1
You will need
8 x Cam Bolts Phillips Head
(H3) Screwdriver
Attach 8 x Cam Bolts (H3) to Front Panel (P7) and Back Panel (P6) by tightening with the
Phillips Head Screwdriver.
Step 2
You will need
8 x Dowels 8 x Cam
(H1) Nuts (H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 8 x Cam Nuts (H4) and 8 x Dowels (H1) into Left & Right Side Panels (P3 & P4) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Front Panel
(P7) and Back Panel (P6) to Left & Right Side Panels (P3 & P4) by tightening all cam
nuts with the Phillips Head Screwdriver.
fantasticfurniture.com.au
(P7)
(P6)
(P3)
(P6)
(P4)
(P7)
Page 5