fantastic furniture Hamilton Tallboy 5 Drawer Manual page 6

Step 3
You will need
Phillips Head
4 x Cam Nuts
(H4) Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4x Cam Nuts (H4) into Rails (P6&P7) as shown.
Rotate the cam nuts so the arrow points towards the
incoming cam bolts. Attach Rails (P6 & P7) to Right Side
Panels (P3) by tightening with the Phillips Head Screwdriver.
Step 4
You will need
4 x Cam Nuts Phillips Head
(H4) Screwdriver
Make sure the side with
bigger holes is facing to Rail (P4).
Insert 4x Cam Nuts (H4) into Rails (P4&P5&P15) as shown.
Rotate the cam nuts so the arrow points towards the incoming
cam bolts. Attach Rails (P4&P5&P15) to Left Side Panels (P2) by
tightening with the Phillips Head Screwdriver. Join Back Panels (P8x2)
with Connect Stick (P14). Slide Back Panels (P8x2) into the grooves of Rails (P6 & P7).
fantasticfurniture.com.au fantasticfurniture.com.au
(P15)
(P5)
D
(P2)
(P6)
(P2)
(P6) (P8)
(P4)
D
(P7)
(P14)
(P7)
D
Page 6