Subscribe to Our Youtube Channel
Related Manuals for Wunderkind Custom BMR18T
Summary of Contents for Wunderkind Custom BMR18T
- Page 1 Installation manual and safety information Cover with reflector BMW R18 From model year 2020 • www.wunderkind-custom.com ••• info@wunderkind-custom.com •...
- Page 2 Installation manual Caution Important safety advice: Working on motorcycles poses a safety risk. Some work may only be carried out by appropriately qualified personnel. Faulty work can have serious consequences and may pose a threat to life and health. Only undertake installation works if you are sufficiently qualified and have an official workshop manual as well as all relevant service notifications available.
- Page 3 Installation manual Content Installation: Cover the fork in the area around the side reflector to protect against damage. Lightly heat the reflectors using a heat gun and pull them off. Remove the adhesive tape. Pull off the reflectors’ protective film and stick them on both sides at the original locations.
- Page 4 Installation manual Attach the cover with the thread pins provided, using thread-locking fluid (medium strength). Final check Afterwards, a test drive must be carried out! After completing the test drive, the tightness of all screw connections must be checked, as well as the adequate freedom of access of all moving parts. •...
Need help?
Do you have a question about the BMR18T and is the answer not in the manual?
Questions and answers