Wunderkind Custom HDN1V Installation And Safety Instructions

Led indicator / taillight rear lighting for harley-davidson nightster

Advertisement

Rear lighting
Installation and safety information
for
Harley-Davidson Nightster from model year 2022
• www.wunderkind-custom.com ••• info@wunderkind-custom.com •

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDN1V and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Wunderkind Custom HDN1V

  • Page 1 Rear lighting Installation and safety information Harley-Davidson Nightster from model year 2022 • www.wunderkind-custom.com ••• info@wunderkind-custom.com •...
  • Page 2 Installation Manual Caution Important safety advice:  Work undertaken on wheels and wheel axles poses a safety risk. This work may only be carried out by appropriately qualified personnel. Faulty work can have serious consequences and may pose a threat to life and health.
  • Page 3 Installation Manual Content • Revision: 00 • 22/11/2022 • © ABM Fahrzeugtechnik GmbH Page 3 of 8...
  • Page 4 Installation Manual Installation: Park the vehicle safely. Remove the seat and both side covers. Unplug the plug connectors of the indicators and the tail light. Completely remove the left rear bracket. Remove the cable harness for the tail light from the holders. •...
  • Page 5 Installation Manual Remove the number plate holder. Unscrew the indicator from the rear support and detach the cable from the adhesive holders. Drill out the fixing hole to 8 mm. Attach the enclosed tail light/indicator combinations to the bracket with an adapter, safety washer and screw. Attach the cable to the bracket with the holders.
  • Page 6 Installation Manual Mount the rear bracket to the vehicle. Fix all removed parts on the left side. Torque according to manufacturer's specifications. Lay the lighting cable under the seat. Repeat the procedure on the right side. Tighten the fender with the supplied spacer, washer and original screw.
  • Page 7 Installation Manual • Revision: 00 • 22/11/2022 • © ABM Fahrzeugtechnik GmbH Page 7 of 8...
  • Page 8 Installation Manual Final check  All electric wires must be laid in a manner which prevents them from bending or getting pulled during all spring deflection movements and which adequately protects them against rubbing.  After completing the work, check that all components and screws are tight and functioning correctly.

Table of Contents