Dear Customer, Thank you for purchasing this Hendi appliance. Before using the appliance for the first time, please read this manual carefully, paying particular attention to the safety regulations outlined below. Safety regulations • This appliance is intended for commercial use.
• Never use accessories other than those recommended by the manufacturer. Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories. • This appliance is not intended for use by persons (including children) with reduced phys- ical, sensory or mental capabilities, or lack of experience and knowledge.
Page 5
It is • Important: do not mount the salamander on dry- recommended to use an electric stud finder (sold wall or paneling without first anchoring to a wall...
Check if the overheating protector is Contact the supplier. der doesn’t heat up. malfunctioning Indicator light doesn’t work while the Indicator light not connected Contact the supplier. salamander is heating up. Indicator light broken Contact the supplier. Technical specifications Item HND299630 Operating voltage & frequency...
Page 7
Important notice to UK users This appliance is fitted with a UK approved mains at 13A must be used. If the plug needs replacing, plug and a 13A fuse. Should the fuse need to be re- ensure that the fuse is removed beforehand. Always placed, an ASTA or BSI approved BS1362 fuse, rated dispose of defunct plugs and fuses immediately.
Need help?
Do you have a question about the SALAMANDER and is the answer not in the manual?
Questions and answers