GeoVision GV-3D People Counter V2 User Manual page 25

Hide thumbs Also See for GV-3D People Counter V2:

Table of Contents

The Web Interface

[MEM]

By default, the counting result is reset to zero at 12:00 midnight everyday. To set a different

reset time, specify the time period from the drop-down list next to Counting value reset and

click Apply. After modifying the reset time, you can also click Sync DB and the GV-Web

Report Lite synchronizes the counting results to the last updated result. For example, if you

change the reset time to 19:00 and click Sync DB, the counting results accumulated from the

previous 19:00 will be displayed in the Counting Signage of GV-Web Report Lite.

Figure 3-16

[GPS]

Select Enable GPS to activate GV-GPS function. You can set the frequency for GV-3D

People Counter V2 to download GPS information from GV-GPS. The interval is between

1~180 seconds. The connection status (Connect / Disconnect) is displayed in Status.

Figure 3-17

Note: The GV-GPS data is only accessible supported by GV-Web Report V2.2.6.0.

Table of Contents

Need help?

Do you have a question about the GV-3D People Counter V2 and is the answer not in the manual?