Advertisement
Structure
Components
№
Name
1
Hopper
2
Main body
3
Rear body
4
Collecting container
5
Rack
Assembling the garden shredder
1. Turn the shredder upside down and fold the legs upwards.
2. Then guide the supplied wheel axle through the openings provided.
3. Slide the two washers right and left over the wheel axle.
4. Also place the spacer sleeves supplied on the wheel axles. Finally, fit the wheels and the lock
nut with the hub cap.
Warning:
Take care when tilting the appliance on the wheels, as its weight distribution is
unbalanced during tilting and moving transport!
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№
Name
6
Wheels
7
Foot
8
On/off switch
9
Reset switch (motor protection)
10
Hand screw
№
Name
1
Wheel
2
Spacer tube
3
Washer
Item 61075
№
Name
4
Locking nut
5
Hubcap
Page 9
10
2021-1
Advertisement
