Advertisement
Spare parts order
When procuring spare parts, the following information should be provided:
•
device type,
•
device item number,
•
device identification number,
•
cutting tools (knives): GY1.
Changing blades
If the knives are to be replaced, this must always be done in pairs. To do this, open the shredder and
block the knife disc with a screwdriver. Loosen the screws using the Allen wrench supplied. Mount the
new knives in the reverse order.
Only have the shredder inspected and serviced by qualified service technicians. Do not attempt
to repair the shredder yourself.
WARNINGS:
•
Never use a high-pressure cleaner or running water to clean the shredder!
•
Brush off dirt and plant residues. Wipe the outside with a cloth moistened with a mild
detergent or water if necessary.
Storage
•
To protect the shredder from corrosion during storage during extended periods of storage, treat
the cutter blade with environmentally friendly oil.
•
Make sure that the garden shredder has thoroughly been cleaned before storing it in a clean
and dry place and out of the reach of children.
Repairs
Attention!
Electrical repair work may only be carried out by an electrician or the customer
service workshop!
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61075
Page 12
10
2021-1
Advertisement
