Advertisement
•
Switch off the shredder, remove the plug from the socket, and wait until the cutter blade has
come to a complete stop before carrying out any maintenance or cleaning work.
•
It is forbidden to remove or modify electrical or mechanical safety devices.
•
Use the shredder only in daylight or good artificial light.
•
If noticing any unusual vibrations in the shredder, immediately switch off the engine and check
the cause of the problem. Vibrations are generally a sign of malfunction.
•
The chopper must be carefully inspected before use! Check that the cutter blade is firmly seated
before using the shredder. The device may only be operated with the cutter blade properly in-
serted. Only work with devices in a proper condition. If you discover any damage or fault on the
device which could be a danger to the user, the device may only be used again after it has been
repaired.
•
For safety reasons, worn or damaged parts must be replaced immediately. Only use original
spare parts. The use of non-original spare parts can lead to malfunctions and injuries and voids
the warranty!
•
Only use the shredder in places where it is protected from water. The machine must not be
exposed to rain!
•
Always keep the shredder in a dry and safe place out of the reach of children. This device must
not be used by children! Children should also be supervised so that they cannot play with the
device. Likewise, maintenance and cleaning must not be carried out by children.
•
This device must not be used by persons with reduced physical, sensory, or mental abilities or
lack of experience and knowledge. Local regulations may limit the user's age.
•
Familiarise yourself with the adjustable parts and proper use of the machine.
Preparation
•
Do not allow children to work with this device.
•
Always wear ear protection and safety glasses during operation.
•
Avoid clothing with a loose fit or hanging straps or bands.
•
Only use the machine with enough free space around it (e.g., not near a wall or other solid
objects) and on firm, level surface. Do not operate the machine on paved ground or gravel where
ejected parts can cause injury.
•
Before switching on the machine, all screws, nuts, bolts, or other fixing agents must be checked
for secure seating, as must be the presence of protective and shielding devices. Replace dam-
aged and illegible stickers.
•
Always wear sturdy shoes and long trousers when operating the machine. Do not operate the
machine barefoot or in light sandals. Avoid wearing loose clothing or clothing with hanging cords
or ties.
•
Replace worn and damaged parts in sets to avoid unbalance.
Operation
•
Before switching on the machine, look into the filling chamber to ensure that it is empty.
•
Do not insert hands or other parts of the body into the hopper or ejection chute.
•
Always ensure a safe stand and good balance. When filling the machine, never stand on a
higher level than the surface on which the machine stands. When operating the machine, always
keep far enough away from the ejector.
•
When filling the machine, always ensure that no pieces of metal, stones, surfaces, cans, or
other foreign objects are inserted. If the cutting mechanism touches a foreign object or if the
machine makes unusual noises or vibrations, immediately switch off the power and let the ma-
chine run out completely or come to a standstill. Disconnect the machine from the power supply
and carry out the following measures in the specified order:
1. Check the machine for possible damage.
2. Make sure that all loose parts have been tightened and that all components are securely
fastened.
3. Each damaged component must be replaced with original spare parts with identical speci-
fications.
•
Do not allow the processed material to accumulate in the ejection area, as this may interfere
with correct ejection or cause the material to recoil through the feed opening. If the machine
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61075
Page 7
10
2021-1
Advertisement
