Download Print this page

WilTec 61075 Operation Manual page 6

Electric garden shredder
Hide thumbs Also See for 61075:

Advertisement

Use the device, accessories, inserts, etc. according to these instructions. Take into account the
working conditions and the activity to be performed. The use of electrically powered equipment
for applications other than those for which it is intended can lead to dangerous situations.
Service
Have your device repaired only by a qualified specialist company with original spare parts. This ensures
that the safety of the device remains guaranteed.
Special safety instructions for the garden shredder
Protective gloves, goggles, and ear protection must always be worn. Do not wear loose clothing!
Always stand safely and in balance. Do not stretch towards the machine.
During operation, the machine must stand on a straight and stable surface. Make sure that all
bolts and nuts have been tightened before use.
The machine may only be used in dry conditions, never in rainy weather outdoors.
Never use the machine with damaged guards or without them.
Hands, other parts of the body, and clothing must be kept as far away from the hopper and the
unloading chute as possible. Never place your face or the rest of your body near the hopper.
Do not leave the machine unattended. However, if you need to leave the machine, absolutely
switch off the motor and disconnect the power plug.
No hard objects such as stones, bottles, cans, or pieces of metal may be brought into the inlet
shaft. This can damage the machine.
If the machine is blocked, switch off the motor and disconnect the machine from the power
supply, remove all objects, and check the machine for damage.
If the fuse burns or the overload protection trips, this is a sign of the machine having been
overloaded and/or of too many devices having been connected to the same extension cable.
Find and remedy the cause. Do not install a stronger fuse to remedy the problem.
Do not touch dangerous moving parts before the machine has been disconnected from the
mains and the moving parts have come to a complete standstill.
Note that no damaged cable may be connected to the power supply. Do not touch a damaged
cable until it has been disconnected from the power supply, as this may result in an electric
shock. Keep the extension cord away from moving and dangerous parts to prevent damage to
the cord.
Do not operate the machine in bad weather conditions, especially when there is a risk of light-
ning!
Do not pull the extension cord. Do not pull the cable tightly. This may damage the plugs or cable
insulation. Although such damage is not visible, it can still be dangerous!
The extension cord must always be kept away from the machine. Remove the plug from the
socket to check it regularly for damage and signs of wear. Do not use the machine with a dam-
aged extension cord!
If a replacement of the connecting cable is required, this must be carried out by an electrically
qualified person in order to avoid safety hazards.
Do not move the machine by pulling the cable. Do not move the machine while the engine is
running. Before first use, the chopper must be properly assembled.
Only use extension cords approved for outdoor use. Before using the machine, make sure that
all cables are in perfect condition. Always switch off the shredder before removing a cable from
the socket.
Keep children and animals away from the shredder. All other persons must stay at a safe dis-
tance from the shredder when it is in operation. Persons who have not read these instructions
or are not familiar with the shredder must not use this machine.
It should be noted that the user himself is responsible for accidents or hazards to other persons
or their property.
The shredder may only be used for its intended purpose.
WARNING:
mediately after the machine has been switched off.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
This machine has rotating blades! The cutting knives will not stop im-
Item 61075
Page 6
10
2021-1

Advertisement

loading