Advertisement
Quick Links
Operation Manual
Electric Garden Shredder
61075
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 61075
Summary of Contents for WilTec 61075
- Page 1 Operation Manual Electric Garden Shredder 61075 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Contents: Machine, 2×wheels, 2×wheel covers, collecting tank, wheel axle, 2×spacer sleeves, washers, 2×nuts, open-end wrench, flat pushrod If parts are missing or damaged, contact your dealer! © by WilTec Wildanger Technik GmbH Item 61075 Page 3 http://www.WilTec.de http://www.aoyue.eu...
- Page 4 • When working with the device, other persons, especially children, must always observe a safety distance. If you are distracted by others, you may lose control of the device. © by WilTec Wildanger Technik GmbH Item 61075 Page 4 http://www.WilTec.de http://www.aoyue.eu...
- Page 5 • Keep the cutting tools (inserts) sharp and clean. Carefully maintained cutting tools with sharp cutting edges jam less and are easier to guide. © by WilTec Wildanger Technik GmbH Item 61075 Page 5 http://www.WilTec.de http://www.aoyue.eu...
- Page 6 The shredder may only be used for its intended purpose. • WARNING: This machine has rotating blades! The cutting knives will not stop im- mediately after the machine has been switched off. © by WilTec Wildanger Technik GmbH Item 61075 Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 7 Do not allow the processed material to accumulate in the ejection area, as this may interfere with correct ejection or cause the material to recoil through the feed opening. If the machine © by WilTec Wildanger Technik GmbH Item 61075 Page 7 http://www.WilTec.de...
- Page 8 Only use extension cables approved for outdoor use (H05VV-F). The cable cross section must be equal to or greater than 1.5 mm² for a length of up to 75 m. Extension cables longer than 30 m generally reduce the performance of the machine. © by WilTec Wildanger Technik GmbH Item 61075 Page 8 http://www.WilTec.de...
- Page 9 4. Also place the spacer sleeves supplied on the wheel axles. Finally, fit the wheels and the lock nut with the hub cap. Warning: Take care when tilting the appliance on the wheels, as its weight distribution is unbalanced during tilting and moving transport! © by WilTec Wildanger Technik GmbH Item 61075 Page 9 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 10 3. Carefully clean the cutting and exhaust elements and remove any objects that may obstruct cutting. 4. Replace the top and tighten the hand screw firmly. 5. Press the reset button again before pressing the on/off switch. © by WilTec Wildanger Technik GmbH Item 61075 Page 10 http://www.WilTec.de http://www.aoyue.eu...
-
Page 11: Warning Notes
Do not use cleaning agents or solvents, as they may cause irreparable damage to your machine. Chemicals can destroy plastic parts. • After every fourth or fifth use, the knives must be oiled! © by WilTec Wildanger Technik GmbH Item 61075 Page 11 http://www.WilTec.de http://www.aoyue.eu... - Page 12 Repairs Attention! Electrical repair work may only be carried out by an electrician or the customer service workshop! © by WilTec Wildanger Technik GmbH Item 61075 Page 12 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
-
Page 13: Troubleshooting
In the event of an accident or any type of malfunction, first stop the appliance and disconnect it from the mains. Always make sure that the moving parts are completely stationary. Only then check the unit or call the customer service. © by WilTec Wildanger Technik GmbH Item 61075 Page 13 http://www.WilTec.de... - Page 14 This logo indicates that this electric equipment must not be disposed with the domestic waste. The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE- registration number DE45283704. Disposal of used electrical and electronic appliances...