Set Up Rules And Alerts; Trigger An Action; Record Video When The Camera Detects Motion - Axis P1367-E User Manual

Hide thumbs Also See for P1367-E:

Table of Contents

AXIS P1367-E Network Camera

Additional settings

Record video

1. Go to the live view.

2. To start a recording, click Record. Click again to stop the recording.

Watch video

1. Click Storage > Go to recordings.

2. Select your recording in the list and it will play automatically.

Set up rules and alerts

You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.

The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects

motion, or show an overlay text while the device is recording.

1. Go to Settings > System > Events to set up a rule. The rule defines when the device will perform certain actions. Rules

can be setup as scheduled, recurring, or for example, triggered by motion detection.

2. Select the Condition that must be met to trigger the action. If you specify more than one condition for the rule, all of the

conditions must be met to trigger the action.

3. Select which Action the device should perform when the conditions are met.

Note

If you make changes to an active rule, you have to restart the rule for the changes to take effect.

This example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and to

stop one minute after.

Make sure that AXIS Video Motion Detection is running:

1. Go to Settings > Apps > AXIS Video Motion Detection.

2. Start the application if it is not already running.

3. Make sure you have set up the application according to your needs. If you need help, see the

user manual for AXIS Video Motion Detection 4.

To watch this video, go to the web version of this document.

www.axis.com/products/online-manual/23180#t10106619

How to record a video stream when the camera detects motion

Table of Contents