Certification; Approvals; Csa - Siemens RUGGEDCOM RS910 Installation Manual

Certification

The RUGGEDCOM RS910 device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1

Approvals

This section details the standards to which the RUGGEDCOM RS910 complies.
6.1.1

CSA

This device meets the requirements of the following Canadian Standards Association
(CSA) standards under certificate 1550963:
•
•
•
•
•
•
•
It is specifically approved for use in hazardous locations with the following markings:
•
RUGGEDCOM RS910
Installation Manual, 04/2021, C79000-G8976-1029-12
CAN/CSA-C22.2 No. 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National Standard, with UL 62368-1)
UL 62368-1
Information Technology Equipment – Safety Part 1: General Requirements
CAN/CSA-C22.2 No. 0-M91
General Requirements - Canadian Electrical Code, Part II
CAN/CSA-C22.2 No. 142-M1987
Process Control Equipment Industrial Products
CAN/CSA-C22.2 No. 213-16
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Divisions 1 and 2 Hazardous (Classified) Locations (Bi-National Standard with
ANSI/ISA-12.12.01-2016)
UL 916
Standard for Energy Management Equipment
ANSI/ISA-12.12.01-2015
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
Class I, Division 2, Groups A, B, C, D
6
35