Sony DSBK-100 Operating Instructions Manual page 17

11
Fasten the pair of cables with
red and black connectors in the
left-side pair of clamps as seen
from the front of the DSR-60/
60P, then stow the noise filter
and the slack portions of cables
neatly in the left-side
partitioned space.
12
Reattach the board retainers
(1) and (2) removed in step 1,
then the top cover of the DSR-
60/60P.
The board retainer (1) has six
pairs of tongues. Position the
retainer so that each pair of
tongues holds the upper edge
of the corresponding board.
Board retainer (1)
Board retainer (2)
Partitioned space
Clamp
Noise filter
Screw
Screw
Screw
17