Sony DSBK-100 Operating Instructions Manual page 15

4
With the two screws supplied
with the DSBK-100/100P,
fasten the SDI-28 board to the
DV-17 board.
5
Pass the two cables (connected
to the SDI-28 board in the
"Preparations" stage) over the
DV-17 board along the
illustrated route and wind the
wire clips around the cables.
6
Return the DV-17 board to the
slot in the DSR-60/60P.
7
Insert the cables connected to
the SDI-28 board into the slit
in the top of the board slot
frame near the rear panel of the
DSR-60/60P.
SDI-28 board
DV-17 board
SDI-28 board
Push down the levers at both ends, and
with both hands press the board firmly
into position.
Metal cover
Looking into holes in
the metal cover, select
the screw holes
surrounded by white
hatching.
Wire clips
(Continued)
15