Download Print this page

WilTec 62554 Operation Manual page 5

Mini saw

Advertisement

Scope of delivery
Remove all packaging materials, remaining packaging and transport brackets (if present).
Check that the contents of the package are complete.
Check the device, the power cord, the power plug and the accessories for transport damage.
If possible, keep the packing materials until the end of the guarantee period.
Warning!
Packaging materials are not toys. Children are not allowed to play with the plastic
packaging. Risk of suffocation!
1 × mini saw
1 × parallel stop
1 × vacuum cleaner connection (12)
1 × hexagon wrench (17)
2 × clamp (2)
3 × guide rail (5)
3 × saw blade wood (HSS): 85×1.6
stone: 85×2
universal (TCT): 85×1.8
General safety instructions for electric devices
Warning!
Carefully read all safety information and instructions in this manual. Failure to do so could
result in electric shock, fire, or serious injury. Keep these instructions in a safe place so that you can
always refer to them.
Work area safety
Always keep your work area tidy and well lit. Dark or cluttered work areas increase the risk
of injury.
Do not use electric devices in potentially explosive areas, e. g. near flammable liquids,
gases or dust. Electric devices can cause sparks igniting these substances.
Keep children and bystanders away from your work area while you are operating an
electric device. Distractions can cause you to lose control of the device.
Electric safety
The power plug must match the socket. Never make changes to the power supply unit.
Do not use adapter plugs on earthed power tools. Unmodified plugs and matching sockets
reduce the risk of electric shock.
Avoid body contact with earthed surfaces, e. g. pipes, refrigerators, stoves, and heat-
ers. The risk of electric shock increases with the body being earthed.
Do not expose the device to rain or a damp environment. If water gets into the device, it
increases the risk of electric shock.
Handle the power cord with care. Never use the power cord to carry, pull, or unplug the
device. Keep the power cord away from heat, oil, sharp edges, or moving parts. Dam-
aged or knotted power cords increase the risk of electric shock.
If wanting to use the electric device outdoors, use an extension cable suitable for out-
door use. Using an outdoor power cord will reduce the risk of electric shock.
If use in a damp environment cannot be prevented, use a protected power supply with
an FI circuit breaker. The use of a residual current circuit breaker reduces the risk of electric
shock.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
 mm
 mm
 mm
Item 62554
Page 5
04
2021-1

Advertisement

loading