Power On/Off - Samyung ENC SGP-330 Manual

]
2. Remote Controller Button

Power Button
Sea Bottom Range
Button (later on) 
수심범위를 변경시
MOB Button (TBA) 
사용
Input button
Selecting Menu, Inputting Data.
Inputting or erasing event mark
when used cursor
8 Directional Button 
Moving Chart, Cursor and Menu
Cursor
Center Button
Moving own ship into the Center.
Moving the coordinator with cursor
into the center of screen. Inputting
the letter.
Zoom-In 
Cursor 
Cursor on screen
Track Button 
Display Track Line
Way Point Button 
Execute waypoint & Route Navigation
Mark Button 
Change Mark Type
Mark Color Button 
Change mark Color
 Dimmer
LCD Dimmer, Transparency
Depth Button (TBA) 
Selecting day/night mode in
Screen

Frequency High/Low selecting
Button when used Fish Finder.
(TBA)
 Sensitivity Button
Change sensitivity (Later on)
 Screen Button
Convert Plotter screen to Fish
Finder or vice versa
 Convert Button
N/S, W/E switch .+/- switch .Waypoint,
Reverse-Route Navigation. Select
High/Low in Fish Finder (Later on)
 ESC Button
-Return Plotter from Menu -Cancel input
 MENU
Menu Item ON/OFF
Move high-level Menu
 Zoom-Out
 Track Color
Change the track color.
 Track Erase
 ALM/CLR
Alarm: Clear
Clear: Erase the course line
 Course Up
Course Up ON/OFF
 EVENT Button
Register waypoint by cursor
 F1 Button
Option button for adding Function
15

3. Power ON/OFF

 Main Power ON/OFF
It is designed to keep ON/OFF main power through "Rocker Switch" placed in rear panel of the Main Unit
and when the switch is "ON" position, power signal from the remote controller is on the stand-by mode by
consuming little power for stand by use.
When switch is "OFF", it is maintained to keep the power OFF without consuming stand-by power at all.
When switch is "OFF", it would not work even remote controller is operated.
 Power ON
When the Main Power is "ON", press
button, then front LED lamp turns on RED and in 10 seconds
SAMYUNG LOGO screen comes to display and Plotter screen comes to display after the screen saying
"...Map Data Load"
 Power OFF
Under the Power ON press button to turn off the Power.
REF ☞ Power Button (from Remote Controller)
For power supply, Button attached on the remote controller is always
available to use. Only it is available when Main Power Switch is always "ON".
16