]
DGPS Mode
[3.SYSTEM]
[1.SATELLITE INFO]
(Whenever press, Auto/Manual/WASS selected.
※ In case of select Manual Mode Input frequency
[REF] When input speed (bps), 0 means 50, 1 means 100 and 2 means 200.
Antenna Height
- To set the height from sea surface to GPS antenna
[3.SYSTEM]
[1.SATELLITE INOF]
Height set
Geodetic Datum Set
- Choose a world standard - WGS-84 for datum
[3.SYSTEM]
[1.SATELLITE INFO]
Choose datum and press
.
[6.DGPS MODE SET]
Input a speed(bps) and press
[7.ANTENNA HEIGHT]
[8.Datum Select]
93
3.2 Print-Out (USB - TBA)
To printout a current plotter screen by using printer.
How to printout
[3.SYSTEM]
[2.SCREEN PRINT]
Printer Select
Only available to use a printer which is supported by HP-PCL .
Sea-Color Print
- If choosing OFF for SEA-COLOR PRINT, you are able to reduce color-ink consumption.
[3.SYSTEM]
[2.SCREEN PRINT]
94
[1.Start printing]
[3.SEA-COLOR PRINT]