How To Set Up Vessel - Samyung ENC SGP-330 Manual

]

2.3 How to set up Vessel

This function set is used to configure a variety of information on the vessel.
 Vessel Auto Center ON/OFF
- To indicate the vessel in the center of the display all the time.
 [2.SET]  [3.SHIP SET]
(Whenever press, [ON/OFF] repeatedly selected.)
 SHIP MARK SIZE SET
- To set ship mark size
 [2.SET]  [3.SHIP SET]
(Whenever press, [small/large] repeatedly selected.)
 [1.AUTO CENTER]
 [2.SHIP MARK SIZE]
 RADIUS SET
- To indicate the radius in red circle, making the vessel as a starting point.
~ 9.99NM),
 SMOOTHING SET
- The set up differs from the vessel type. The higher the value entered, the more stable it is.
 [2.SET]
smoothing value (1 - 9),
bearing smoothing value (0 ~ 99),
Commercial,
Tuna Fishing
Single & Twin Trawl
Low speed small fishing boats.
 LAT/LON CORRECTION
- If any value error of the current position, the log/lat. can be corrected per second, minute with this
function.
 [2.SET]
LAT correction value(±00.00 ~ ±99.99),

HEADING DISPLAY
(Whenever press, [ON/OFF] repeatedly selected.)
75 76
 [2.SET]  [3.SHIP SET]  [3.RADIUS SET]
 [3.SHIP SET]  [4.SMOOTHING SET]
 Input speed smoothing value (0 ~ 399),
<Recommendable SMOOTHING Value>
Types Lon/Lat Smoothing
Value
Squid Fishing, 1
2
3~5
 [3.SHIP SET]  [5.LAT/LON CORRECTION]
 Input LON correction value(±00.00 ~ ±99.99),
ON/OFF
 [2.SET]  [3.SHIP SET]  [6.HEADING DISPLAY]
 Input range (0.01
 Input position
 Input
Speed/Bearing
Smoothing Value
1
3
6~9
 Input