Alarm Functions - Samyung ENC SGP-330 Manual

]

2.2. Alarm functions

2.2.1 Arrival Alarm
While using Waypoint Navigation and Route Navigation, this function is designed to sound an alarm once
the vessels within a preset distance of the final destination.
 Arrival Alarm ON/OFF
 [2.SET]  [2.ALARM SET]
(Whenever press, [ON/OFF] repeatedly selected)  When selecting ON , use the numbers to
input Arrival Alarming Range (0.01 ~ 9.99) ,
 When Arrival Alarm is on, press
on remote controller to cancel.
[REF] Once own ship goes into the range of arrival alarm, a red circle is disappeared and then alarm.
 [1.ARRIVAL ALARM] 
69
2.2.2 Cross Track Error Alarm (XTE)
While using in the Navigation Mode, this function sounds an alarm to alert the operator of an off-course
condition.
 How to set XTE Alarm
 [2.SET]  [2.ALARM SET]
(Whenever press, [ON/OFF] repeatedly selected.)  When selecting ON , use the numbers to
input XTE Range (0.01 ~ 9.99),
[REF] The XTE range is indicated with a blue line, the window in the bottom
70
 [2. XTE ALARM] 
shows the XTE distance.