System Information - Samyung ENC SGP-330 Manual

]
 MEMORY CLEAR
- Delete all memory data and then make the equipment-initialized status.
 [3.SYSTEM]  [4.SYSTEM SET]
YES ,
 CHART SET
- Chart selection on display
 [3.SYSTEM]  [4.SYSTEM SET]
 Select [C-MAP UNIT],
chart,
[REF] 'C-MAP UNIT' and 'BLANK Level' are for selection of
when chart selection is changed.
 LANGUAGE SET
 [3.SYSTEM]  [4.SYSTEM SET]
(Whenever press, [Korea/English/Russian/China/Taiwan] selected in sequence.) 
And then power off -> Rebooting
 [4.MEMORY CLEAR]  Select
 [5.CHART SET]  Choose
 Select [BLANK Level],
C-MAP chart, equipment should be re-boot
 [6.LANGUAGE SET]


3.5 System Information

Users can display the system information such as LCD, Plotter Model, Program, Chart, PIC Version.
 LCD-MODE Set
- Set as Sharp.
 [3.SYSTEM]
(Whenever press, [Sharp/PVI-1/PVI-5] selected in order.)
 PLOT-MODE Set
- To set up the Plot mode of SYSTEM when using with Samyung Auto Pilot System.
 [3.SYSTEM]
(Whenever press, [General/Plot] repeatedly selected.)
105 106
 [5.SYSTEM INFO]  [1.LCD-MODE]
 [5.SYSTEM INFO]  [2.PLOT-MODE]