Operation - Vacmaster RESPIRA UC0412EUK Manual

CAUTION: Moving parts! To reduce the risk of personal injury, DO NOT touch the brushroll
when vacuum cleaner is turned on. Contacting the brushroll while it is rotating can cut, bruise or
cause other personal injuries. Always turn off before maintenance. Use caution when operating
near children or pets (Fig. 7).
1. Power Cord - Release & Use
1) Turn the upper cord hook to either side to release the power cord (Fig. 8).
2) Detach the power cord plug from the power cord.
3) Be sure the power cord is locked into the upper locking notch (
4) Plug the power cord into a power outlet.
5) Move the On/Off switch to the desired cleaning operation. Refer to page 9.
6) Once you have completed vacuuming, move the On/Off switch to the Off 'O' position and
unplug the power cord plug from the outlet.
7) Return the upper cable hook into the upright storage position and wrap the cord loosely.
WARNING: If any abnormality/failure occurs, stop using the product immediately and
disconnect the power plug.
2. Operation Modes
UPRIGHT MODE
NOTE: Make sure the vacuum cleaner is correctly assembled and the dust bin is empty before
using. Do not operate vacuum cleaner without filters in place.
1) Release the handle by placing foot on the floor head nozzle and pull back (Fig. 10).
2) To turn the vacuum cleaner on, press the On/Off switch to the desired position (Fig. 11).
'O' Power Off
'I' Hard floor, small area rugs and delicate surfaces. NOTE: The brushroll will not spin in this
position.
'II' Carpets. NOTE: The brushroll will spin in this position.
CAUTION: Do not allow the vacuum cleaner to remain in one spot for any length of time
when the brushroll is turning. Damage to carpet may occur.
3) Once you have completed vacuuming, switch to the Off "O" position and unplug the power cord
from the power outlet.
NOTE: Do not allow the motorised floor head to be lifted away from the floor surface when
vacuuming.

OPERATION

9
) as shown (Fig. 9).
3
GB