In the subsequent paragraphs, we explain how to connect cables 1 to 4 inclusive.
For information on how to connect cables 5, 6 and 7, refer to the Interface Manual.
4.1.2
Connecting the Power Cable "ACIN" (1 of Fig. 4.1; plug connector attached)
The power cable is used to supply the main AC power to the controller.
Item
Power supply
Power capacity
Instantaneous power
failure
Grounding
The connector is ACIN (1 of Fig. 4.1).
ACIN plug connector
ACIN cable clamp
Wire
As the cable is not an accessory, use the attached plug connector connected to ACIN
on the controller side to manufacture a cable.
Wires are to be soldered to the connector.
TRANSPORTATION AND INSTALLATION MANUAL
Table 4.1 Power supply specifications
Single phase, AC 200 ~ 240 V, 50/60 Hz
4.4 kVA
Within 40 msec
JIS class D
Type:
JL04V–6A22-22SE-EB-R
Type: JL04–2022CK (14)-R
2
3.5 mm
~ 5.5 mm
– 40 –
Specifications
Maker: Japan Aviation
Maker: Japan Aviation
2
±
1 Hz
Electronics Industry
Electronics Industry
STE80753