Starting A Programme; Starting The Programme - Miele TWJ 660 WP Operating Instructions Manual

Starting the programme

 Touch the flashing Start/Add laundry
sensor control.
The Start/Add laundry sensor control
will light up and Drying appears in the
display.
Notes
If a delay start time has been selected,
then this will count down in the time
display. At the end of the delay start
time or immediately after the pro-
gramme has started the programme
duration will appear in the time display.
With a longer delay start time, the drum
will rotate occasionally to untangle the
laundry. This is not a fault.
- The Perfect Dry indicator will only
flash/light up with programmes with
selectable drying levels (see also
"Operating the tumble dryer").
- The dryer measures the residual
moisture of the laundry and calcu-
lates the required programme dura-
tion.
If a small load or dry laundry is
placed in the dryer, it is dried/aired
for a preset duration. In this case the
Perfect Dry indicator does not light
up at the end of the programme.
To prevent laundry wearing out
avoid overdrying it.

5. Starting a programme

The drying level reached for the selec-
ted drying level programme will light up
in the display.
You can view the selected drying level
or time again:
 Touch the  or  sensor.
- Before the programme finishes, the
laundry is cooled.
Energy savings
After 10 minutes, the indicators dim.
The Start/Add laundry sensor control
flashes slowly.
 Touch the Start/Add laundry sensor
control to switch the indicators on
again (this does not have any effect
on a running programme).
The drum lighting switches off once the
programme has started.
Adding laundry
You can add laundry items after the
programme has started.
 Follow the description in "Changing
the programme sequence – Adding or
removing laundry".
37