Miele TWJ 660 WP Operating Instructions Manual page 36

4. Selecting programme settings
The selected delay start time has been
cancelled.
After the programme has started, the
selected delay start time can only be
changed or cancelled by interrupting
the programme.
Adding laundry during ongoing delay
start period
 Follow the description in "Changing
the programme sequence – Adding or
removing laundry".
SmartStart
The SmartStart function lets you
define a time period during which your
tumble dryer will start automatically.
The appliance will start on receipt of a
signal, e.g. from your energy supplier,
that indicates that the electricity tariff
is particularly economical.
This function is active when the
setting is switched on.
SmartGrid
The timeframe can be defined between
15 minutes and 24 hours. During this
period, the tumble dryer waits for the
signal from the energy supplier. If no
signal is sent during the defined period,
the tumble dryer starts the drying pro-
gramme.
36
Setting the timeframe
If you have activated the
function in Settings,
stead of will appear in the dis-
Start in
play when you touch the  sensor
control (see "Settings – SmartGrid").
The procedure for setting this is the
same as for setting the time for Delay
start.
 Use the  sensor controls to enter
the hour and confirm your entry with
the OK sensor control.
The hour will be saved and the minute
number block will be highlighted.
 Use the  sensor controls to enter
the minutes and confirm your entry
with the OK sensor control.
 Press the Start/Add laundry sensor
control to start the drying programme
with SmartStart.
The following will appear in the display:

SmartStart

SmartGrid
SmartStart in in-
OK