Feedback - Miele TWJ 660 WP Operating Instructions Manual

Feedback

You can view information about the en-
ergy consumption of your tumble dryer
with the  sensor.
The following information will appear in
the display:
- An estimate of the energy consump-
tion before the programme begins.
- The actual energy consumption dur-
ing the programme or at the end of
the programme.
1. Viewing the estimated consump-
tion
 After selecting a drying programme,
touch the  sensor.
The estimated energy consumption
level will be displayed as a bar chart.


          

The more bars visible ( ) , the higher the
energy consumption.
The estimate will vary depending on the
drying programme, temperature and
any options selected.
 Touch the OK sensor or wait until the
display automatically returns to the
standard display.
2. Viewing the actual consumption
The actual energy consumption can be
viewed during the programme or at the
end of the programme.
 Touch the  sensor control.
Energy
If the energy consumption is too low,
< 0.1 kWh
sumption will alter as the programme
progresses.
It is also possible to view the degree
of soiling of the filter as a % at the end
of the programme before you open the
door.
 Touch the  sensor to switch to the
Filter display.
= lightly soiled,
0 %
OK
soiled,
100 %
Increased soiling will cause the pro-
gramme duration to increase which in
turn will increase energy consumption.
If the door is opened or the appli-
ance has switched off automatically
at the end of the programme, the
data will revert to the estimated con-
sumption.
Tip: You can view the consumption
data for the last drying programme in
 under
Settings
Energy saving tips

< 0.1 kWh

will be displayed. The con-
= moderately
50 %
= heavily soiled.
Consumption
OK
.
27