Table of Contents
Advertisement
5. Starting a programme
Starting the programme
Touch the flashing Start/Add laundry
sensor control.
The Start/Add laundry sensor control
will light up and Drying appears in the
display.
Notes
If a delay start time has been selected,
then this will count down in the time
display. At the end of the delay start
time or immediately after the pro-
gramme has started the programme
duration will appear in the time display.
With a longer delay start time, the drum
will rotate occasionally to untangle the
laundry. This is not a fault.
- The PerfectDry indicator will only
flash/light up for programmes with
selectable drying levels (see also
"Operating the tumble dryer").
- The tumble dryer measures the resid-
ual moisture of the laundry and cal-
culates the required programme run-
ning time accordingly.
If you barely place anything inside the
tumble dryer or load it with dry laun-
dry, this will be sensed by the empty
drum detection feature. The auto-
matic load recognition function will
restrict the running time of the selec-
ted programme once it has started.
The fabrics will be gently dried or
aired. In this case, the PerfectDry in-
dicator does not light up at the end of
the programme.
To prevent laundry wearing out
avoid overdrying it.
38
The drying level reached for the selec-
ted drying level programme will light up
in the display.
You can view the selected drying level
or time again:
Touch the or sensor.
- Before the programme finishes, the
laundry is cooled.
Energy savings
After 10 minutes, the indicators dim.
The Start/Add laundry sensor control
flashes slowly.
Touch the Start/Add laundry sensor
control to switch the indicators on
again (this does not have any effect
on a running programme).
The drum lighting switches off once the
programme has started.
Adding laundry
You can add laundry items after the
programme has started.
Follow the description in "Changing
the programme sequence – Adding or
removing laundry".
Advertisement
Chapters
Table of Contents
