Feedback - Miele TWJ 660 WP Operating Instructions Manual

Energy saving tips

Feedback

You can view information about the
energy consumption of your tumble
dryer with the  sensor.
The following information will appear in
the display:
- An estimate of the energy
consumption before the programme
ends.
- The actual energy consumption
during the programme or at the end
of the programme.
1. Estimate
 After selecting a drying programme,
touch the  sensor.
The estimated energy consumption will
be displayed as a bar chart.


          

The more bars ( ) are visible, the higher
the energy consumption.
The estimate will vary depending on the
drying programme, the drying level and
any Extras selected.
 Touch the OK sensor or wait until the
display automatically returns to the
standard display.
26
2. Viewing actual consumption
You can view the actual energy
consumption during the programme or
at the end of the programme.
 Touch the  sensor.
Energy
If the energy consumption is too low,
< 0.1 kWh
consumption will change as the
programme progresses.
It is also possible to view the level of
soiling in the filters as a percentage at
the end of the programme before
opening the door.
 Touch the  sensor to switch to the
display.
Filter
0% = lightly soiled,
OK
soiled,
100%
With increased soiling, the programme
duration is extended, which increases
energy consumption.
If the door is opened or the
appliance has switched off
automatically at the end of the
programme, the data will revert to
the estimated consumption.
Useful tip: You can view the
consumption data for the last drying
programme in
Consumption

< 0.1 kWh

will be displayed. The
50% = moderately
= heavily soiled.
 under
Settings
.
OK