Sony Handycam DCR-PC330 Operation Manual page 109

Symptom
The data file icon flashes.
Dubbing/Editing
Symptom
Pictures from connected devices are
not displayed on the LCD screen or
the viewfinder.
Cannot dub correctly using the A/V
connecting cable.
Pictures from connected devices are
not displayed correctly.
New sound added to a recorded tape
is not heard.
A title is not recorded/A cassette label
is not recorded.
The title is not displayed.
The title cannot be deleted.
The Title search does not work.
Still pictures cannot be dubbed from a
tape to a "Memory Stick."
Movies cannot be dubbed from a tape
to a "Memory Stick."
Cause and/or Corrective Actions
• The file is damaged.
• The file format is not supported on your camcorder. (p. 117)
Cause and/or Corrective Actions
cSet [DISPLAY] to [LCD PANEL] in the
menu. (p. 81)
cSet [VIDEO INPUT] to the appropriate signal the
SET) menu. (p. 79)
cSet [VIDEO INPUT] to the appropriate signal the
SET) menu. (p. 79)
cSet [DISPLAY] to [LCD PANEL] in the
menu. (p. 81)
• The input signal is not NTSC. (p. 87)
cIn the
(STANDARD SET) menu, adjust [AUDIO MIX] from the
[ST1] (original sound) side until the sound is heard appropriately. (p. 78)
cUse a cassette with Cassette Memory. (p. 116)
cErase unnecessary titles when the Cassette Memory is full. (p. 75)
cSet the write-protect tab to REC. (p. 116)
• A title cannot be added to a blank section of the tape.
cSet [
TITLE DISP] to [ON] in the
(p. 75)
cSet the write-protect tab to REC. (p. 116)
cEnter a title if there is no title on the tape. (p. 74)
cUse a cassette with Cassette Memory. (p. 116)
cSet [
SEARCH] to [ON] in the
• There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
• You cannot record or a distorted picture may be recorded if the tape has
been used repeatedly for recording.
• You cannot record or a distorted picture may be recorded in the
following:
– The tape has a blank section.
– The tape has been used repeatedly for recording.
– Input signal has been interrupted or cut.
(STANDARD SET)
(STANDARD
(STANDARD
(STANDARD SET)
(EDIT/PLAY) menu.
(EDIT/PLAY) menu. (p. 74)
,continued
Troubleshooting
109