Step 2: Charging the
You can charge the battery by attaching the
"InfoLITHIUM" battery pack (M series)
to your camcorder.
• You cannot use batteries other than the
"InfoLITHIUM" battery pack (M series) (p. 119).
• Do not short-circuit the DC plug of the AC Adaptor
with any metallic objects. This may cause a
• Use a nearby wall outlet when using the AC
Adaptor. Disconnect the AC Adaptor from the wall
outlet immediately if any malfunction occurs.
DC IN jack
To the wall outlet
Slide the battery release lever and
remove the battery terminal cover.
Battey release lever
Attach the battery pack by sliding it in
the direction of the arrow until it
With the b mark on the DC plug
facing the jack cover, connect the AC
Adaptor to the DC IN jack on your
Connect the power cord to the AC
Connect the power cord to the wall