Sony Handycam DCR-PC330 Operation Manual page 128

A Flash (p. 30)
B Focus ring (p. 36)
C Lens (Carl Zeiss Lens)
Your camcorder is equipped with a Carl
Zeiss lens which can reproduce fine images.
The lens for your camcorder was developed
jointly by Carl Zeiss, in Germany, and Sony
Corporation. It adopts the MTF
measurement system for video cameras and
offers a quality as fine as a Carl Zeiss lens.
The lens for your camcorder is also T*-
coated to suppress unwanted reflection and
faithfully reproduce colors.
MTF stands for Modulation Transfer
Function.The value number indicates the
amount of light from a subject coming into
the lens.
D Camera recording lamp (p. 23, 28)
E Remote sensor/Infrared ray emitter
(p. 92)
F Jack cover
128
Quick Reference
G Intelligent accessory shoe
(p. 97)
The intelligent accessory shoe supplies
power to optional accessories such as a
video light or microphone.
The accessory can be turned on or off as
you operate the POWER switch on your
camcorder. Refer to the operating
instructions of the accessory for details.
The intelligent accessory shoe has a safety
device for fixing the installed accessory
securely. To connect an accessory, press
down and push it to the end, and then
tighten the screw. To remove an accessory,
loosen the screw, and then press down and
pull out the accessory.
H Microphone (p. 97)
I HOLOGRAM AF emitter (p. 37)
J
DV Interface (p. 121)
K
(USB) jack
L DC IN jack (p. 13)