Inalto Classique IDW604W User Manual page 27

PAGE 27 INALTO.HOUSE
GENERAL CARE ADVICE
After every wash
After every wash cycle, turn off the water supply to the dishwasher and leave the door slightly ajar to that
moisture and odours are not trapped inside.
Remove the plug
Before undertaking any cleaning or maintenance steps, always remove the dishwasher's plug from it's power
outlet (power socket).
WARNING! Risk of electrocution if this step is not followed.
No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher, never use solvents or abrasive cleaning products. Only
use a cloth with warm soapy water. To remove stubborn stains or spots from the surface of the interior, use a
clothe dampened with water and some white vinegar, or use a specially designed dishwasher cleaner available
from your local supermarket.
When your dishwasher will not be used from sometime
It is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from its power
outlet (power socket), turn off the water supply at its supply tap and leave the door of the dishwasher slightly
open. This will help the door seals to last longer, prevent odours from forming inside the appliance and prevent
mould and mildew from developing.
Moving the appliance
In the event that the appliance must be moved, please try to keep it in its vertical position. If absolutely necessary,
it can be positioned on its back. Failure to follow this step can lead to internal damage.
Door seals
One of the factors that cause odours to form within a dishwasher is the residual food that remains trapped within
the seals. Periodic cleaning with a damp cloth will prevent this from occurring.