Figure 10. Provisioning Screen; Figure 11. Span Status Screen - ADTRAN 3192 H2TU-C Installation And Maintenance Manual

The Provisioning Screen, illustrated in Figure 10,
displays the current provisioning settings for the
HDSL2 circuit. Options that can be changed from this
screen are labeled with a number (e.g., "1" for DSX-1
Line Buildout). To change a particular option setting,
select the appropriate number and a new menu will
appear with a list of the available settings.
CIRCUIT ID:
CIRCUIT ID:
10
Press ESC to return to previous menu
Provisioning
1. DSX-1 Line Buildout
2. DSX-1/DS1 Line Code
3. DSX-1/DS1 Framing
4. NIU Loopback
5. Loopback Timeout
6. DS1 TX Level
7. Shelf Alarm
Selection:

Figure 10. Provisioning Screen

Press ESC to return to previous menu
Span Status Screen
ATTEN
______ <-03dB->
|H2TUC |
<------| |
| |
| |
| |
NET | |<--------->|
| |15dB
| | MARGIN
| |
--LOS-->| |
|______|
DSX-1
1. Legend
2. Detailed Status
Selection:

Figure 11. Span Status Screen

Section 61222004L2-5, Issue 1
An asterisk will appear on the Provisioning Screen
when a software setting conflicts with a hardware
setting.
The Span Status Screen, illustrated in Figure 11,
provides quick access to status information for each
HDSL2 receiver in the circuit.
01/01/00 00:02:15
= 0-133 Feet
= B8ZS
= ESF
= Enabled
= 20 Minutes
= 0 dB
= Disabled
01/01/00 00:02:56
______
|H2TUR |
| |------>
| |
| |
| |
| CUST
14dB| |
| |
| |
| |<-AIS—
|______|
DS1
61222004L2-5A