Control In Operation - Siemens SIPROTEC 7SS60 Manual

Control in Operation

7SS60 Manual
E50417-G1176-C132-A2
This chapter deals with the control of the SIPROTEC 7SS60 system while it is in op-
eration. It describes how to obtain information from the system, to set the date and
time and to check the status of the binary inputs.
Detailed knowledge of the functioning of the system is not required. A prerequisite for
control is, however, that the system settings have been made as described in Chapter
4, and especially that the input and output functions have been marshalled.
6.1 Read-out of information
6.2 Read out of the date and time
6.3 Testing the status of the binary inputs/outputs
6
6-2
6-5
6-6
6-1