10. TUNER MEMORY CLEAR (Write in operation manual)
Work : Clear all TUNER PRESET MEMORY
Input : During POWER ON at TUNER function, press CLEAR/DELETE button more than 3 sec.
PRESET CLR?
Press MEMORY/ENTER button to confirm the request.
COMPLETE
finish.
11. SOFTWARE RESET (Open to the user by manual explanation)
Function:
— Software RESET.
— All the function condition will be initialize.
— After display "RESET", power will off.
Input:
During POWER OFF, press DISPLAY + SKIP UP + ON/STAND-BY button
Operation: 1. If start from ECO, ON the AC RELAY (micom high speed)
2. Clear All RAM except HCMS RAM
3. INITALIZE all function condition
4. "RESET" display for 2 sec
5. Change to POWER OFF (DEMO MODE — default)
"RESET" display
All manuals and user guides at all-guides.com
R E S E T
– 21 –
10 sec
1.5 sec
MD-E9000H