Usb Interface Connection - Phoenix Gold ZDA4.6 Owner's Manual

ZDA4.6 Owners Manual
SOFTWARE OPERATION INSTRUCTION

USB INTERFACE CONNECTION

Connect the DSP to your PC via the USB cable supplied. The PC will locate the
device, install and upgrade automatically. After a few seconds you will see a
new device added and called HID-compliant device. See image below:
If the DSP software is OFFLINE, the button on the main interface screen will be
RED. Once the DSP is connected, a dialogue box will show a 'CONNECTING TO
DATA' message on screen. After a few seconds, the OFFLINE button will change
to ONLINE and become GREEN.
OFFLINE
ZDA4.6 - DSP AMPLIFIER
The device appearing here means
the computer has identified the
machine successfully and can
move on to the next step to get
the software online.
© 2021 Phoenix Gold • www.phoenixgold-eu.com
ONLINE