Work Mode; Log-In Mode - Sehan Electools SCOUT II Manual

6.2 Work mode

6.3 Log-in mode

Factory setting password "0000" can be changed in P33 parameter.
Program # 1 to 8
Mode
1 WORK 【 READY 】
< 0000000 > 0000mS
Total fastened screw number
Move to next MODE when only cycle reset
Error and Cycle RESET
[ PASSWORD ]
[ 0000 ]
1. Move back to work MODE without password login
2. Move to next Parameter MODE after password login
Judgement ( READY / OK / NG )
Fastenting time
Decrease count number (-1)
[ PASSWORD ]
[ LOGIN ]
Move the cursor left
Log-in enter
- 8 -
Program # UP (1 to 8)
Program # DOWN
Number UP (0 to 9)
Number DOWN