Operation; Mode - Sehan Electools SCOUT II Manual

6. Operation

6.1 Mode

By pressing the MODE button, it circulate
Log-in, Parameter and Measuring
Work means operating.
Before parameter mode, password is required.
Every settings is possible in Parameter mode.
Once logged in, it circulate Work, Parameter
and Measuring mode, until the power is off
and on again. Fastening time is monitored on Measuring mode. Minimum and
Maximum measured time can be saved on the selected program #.
Factory setting password : " 0 "
1 WORK 【 READY 】
< 0000000 > 0000mS
log in
MODE
untill re-boot
[ PASSWORD ]
[ 0000 ]
Password
[ PASSWORD ]
[ LOGIN ]
MODE
MODE
[ PARAMETER ]
PLEASE ENTER
[07] CNT NUMBER 7
[ 05 ]
[07] CNT NUMBER 7
[ 05 ]
Work,
mode.
Measuring
MODE
RESET
RESET
- 7 -
Work
(Log-in)
Parameter
MODE
[MEASURING] [00]
[0000ms] [0000ms]
▲
▼
[MEASURING] [00]
[0000] [AVG:0000]
RESET
[MEASURING] [02]
[PROGRAM NO: 5 ]