Motorola MC1000 User Manual page 50

Troubleshooting the Mobile Computer (Continued)
Table 4-1
Problem
Mobile computer turns
itself off.
A message appears
stating that the mobile
computer memory is full.
The mobile computer
does not accept scan
input.
Cause
Mobile computer is The mobile computer turns off after a period of inactivity. This
inactive. period can be set from one to five minutes, in one-minute
intervals.
Battery is depleted. Replace the battery.
Battery is not inserted Insert the battery properly. See
properly. page
Too many files stored Delete unused memos and records. If necessary, save these
on the mobile records on the host computer.
computer.
Too many applications Remove unused installed applications from the mobile
installed on the mobile computer to recover memory.
computer.
Scanning application Verify that the mobile computer is loaded with a scanning
is not loaded. application. See the system administrator.
Unreadable bar code. Ensure the symbol is not defaced.
Distance between exit Ensure mobile computer is within proper scanning range.
window and bar code
is incorrect.
Mobile computer is not Ensure the mobile computer is programmed to accept the type
programmed for the of bar code scanned.
bar code type.
Mobile computer is not Check that the application is set to generate a beep on good
programmed to decode.
generate a beep.
Battery is low. Check the battery level. When the battery is low, the mobile
computer automatically goes into suspend mode.
Maintenance & Troubleshooting
Solution
Main Battery Installation on
1-3.
4 - 3