Philips Avent SCF393/61 Manual page 17

Mode indicator lights
The breast pump has two modes. Below you find an explanation of these modes.
Indicator Mode
lights
Stimulation
mode
Expression
mode
Note: When you change the suction level, the display shows the selected suction level for a few
seconds and then shows the selected mode again.
Suction level indicator lights
Suction level 1: Suction level 2:
Bottom light Bottom light
flashes steady on
Note: Every time the level increases, the next light starts flashing or the flashing light becomes solid.
Pumping instructions
Warning: Before you remove the pump body from your breast, always switch off the
breast pump to release the vacuum.
Warning: Do not continue pumping for more than 5 minutes at a time if you do not
succeed in expressing any milk. Try to express at another time during the day.
Warning: If the process becomes very uncomfortable or painful, stop using the pump
and consult your healthcare professional.
Caution: If discomfort is felt, then suction can be broken by inserting a finger between the breast
and the cushion.
Explanation
Mode to stimulate the breast to start
up the milk flow.
Mode for efficient milk removal after
milk has started flowing. After 90 sec. of
stimulation, the device automatically
switches to the expression mode.
Suction level 3:
Bottom light
steady on +
next light
flashes
No. of suction levels
8 suction levels
16 suction levels
Suction level 4: Suction level 5:
2 lights steady 2 lights steady
on. on + next light
flashes.
English
17
Suction level
16: all lights are
on