Table of Contents
Advertisement
76
Press <START> to confirm when a 0-vial has been inserted in the oven. The display changes to the main screen
and conditioning begins (Fig. 53). Once the start conditions are reached, the method name is no longer greyed
out and a sample measurement can be started via <START> (Fig. 54).
Fig. 53
Fig. 54
At the end of each titration, a new sample measurement can be started directly from the results screen via
<START> without measuring a new 0 – vial. The previously determined basic drift will also be used for the new
titration. If the result screen is exited via <ESC>, a new 0 – vial can be inserted or the last titrated sample can be
used as the new 0 – vial.
Fig. 55
A new 0 - vial can be inserted via <START>. The gas supply switches off and the needle head moves up. Via
<OK> the titrated sample is used as a new 0 – vial. The display switches back to the main screen and the new
titration can be started as soon as the start conditions are met.
Advertisement
Table of Contents
