Thickness Knob Adjustment (Feeding Gap); Emergency Stop Button - AccuBANKER AB5800 User Manual

Bank grade value extension bill counter

Hide thumbs Also See for AB5800:

Table of Contents

4. Operation (continued)

4.3 Thickness Knob Adjustment (Feeding Gap)

Proceed with this calibration when the bills are not fed smoothly through the

machine or miscounting errors are occurring frequently.

Other reasons that might require readjusting the feeding gap are:

The counting of new or mint condition bills

The counting of poor or bad fitness condition bills

Having the correct thickness adjustment knob positioning will ensure a

smooth counting as well as a trouble-free unit's operation.

Trial and error attempts are recommended before you make the final

adjustment.

a. for new (thinner) notes, adjust toward "-" to reduce the gap

b. for used (thicker) notes, adjust toward "+" to increase the gap

c. small adjustment toward "+" direction works best

d. polymer bills might require to reduce the gap for ensuring a good

counting result

Reduce thickness gap

rotates knob toward "-"

The emergency stop button stops the unit operation immediately in case any

incident occurs. The unit requires to be turned OFF and ON again to resume

the counting operation.

Be aware to not press the Emergency button by accident during the normal

operation with the unit.

Increase thickness gap

rotates knob toward "+"

Table of Contents