Functions Detection Sensitivity Adjustment (Mg-Uv-Dd-Level); Display Brightness Adjustment - AccuBANKER AB5800 User Manual

Bank grade value extension bill counter

Hide thumbs Also See for AB5800:

Table of Contents

2. Equipment Overview (continued)

3.3 Functions Detection Sensitivity Adjustment (MG-UV-DD-

LEVEL)

The user has the option to adjust (increase or decrease) the sensitivity of the

detection functions based on their specific needs. The sensitivity can be

adjusted from 1-9, where 1 is the lowest sensitivity and 9 the highest

sensitivity to adjust.

To modify the setting values, keep pressing down the desired security

function for 3 seconds until the display shows the current sensitivity value

this function has. Use the numeric keypad to select the new value to set up,

then press START to validate the selection and return to the counting mode.

NOTE: In case the unit frequently reports error messages, related to any

security feature (MG - UV - DD), consider verifying the current Sensitivity

setting for these functions. They might be too high for the current notes that

are being counted.

The user might need to adjust (increase or decrease) the screen brightness to

make it easier to read the screen.

Press key # "7" (for 3 seconds) to enter into the BRIGHTNESS menu,

then press sequentially the "CURR" to increase or "DEN" to reduce

the display brightness until reaching the desired value.

Press START to validate the selection and return to count mode.

USD

MG:

UV:

LEVEL: 2

Batch

Table of Contents