Related Manuals for AccuBANKER AB630
Summary of Contents for AccuBANKER AB630
- Page 1 User Guide AB630 Enterprise High Capacity Universal Coin Counter www.AccuBANKER.com...
- Page 2 Thank you for trusting AccuBANKER with your cash handling needs. In order to optimize the performance of your equipment, we encourage you to thoroughly read this user guide prior to use. www.AccuBANKER.com...
-
Page 3: Table Of Contents
Table of Contents Introduction ..................... 4 Safety Instructions ..................5 1. Box Contents ....................9 2. Part Description ..................10 3. Control Panel Description ................ 11 4. Operation....................15 4.1 Basic Counting Operation ..............17 4.2 Sorting / Counting ................19 4.3 Packaging ..................... -
Page 4: Introduction
Introduction The AB630 is a Universal Coin Counter that allows the user to count, sort, bag, and package most international coins. The coin sorting mechanism is completely adjustable by the user to suit their daily needs. The machine can be used for the following tasks:... -
Page 5: Safety Instructions
Safety Instructions Warning Do not use this product in areas where it may be exposed to water or other liquids. Unplug this product from the electric outlet before cleaning. Do not use liquid or aerosol cleaners. To clean, use a damp cloth. - Page 6 Safety Instructions (cont.) Caution When unplugging the power cord, do not pull it by the cord, but rather grip the plug to pull it out. Not following these instructions may result in electric shock, fire, or damage to the unit. Do not use the unit if the power cord is damaged or if the plug socket contact is loose.
- Page 7 Safety Instructions (cont.) • Read and understand all of the safety instructions. • Follow all warnings and instructions marked on the unit. • This product is meant to be operated in an indoor environment with proper ventilation. • Do not place near direct sunlight, heat sources, or air conditioners. •...
- Page 8 Safety Instructions (cont.) • Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power supply cord or plug is damaged or frayed* If liquid has been spilled into the unit, or it has been exposed to rain or water* If the product has been dropped or the case has been damaged* If the product shows a noticeable change in performance...
-
Page 9: Box Contents
1. Box Contents When opening the box, verify that all of the items described below are included: 1. AB630 coin counter 2. Lateral rejecting tray 3. Lateral rejecting tube (bag holder) 4. Power cord and Printing Materials... -
Page 10: Part Description
2. Part Description Main Parts and Components 1. Hopper Tray 4. Control Panel / Display 2. Thickness Adjustment Knob 5. Coin Exit tube 3. Diameter Adjustment Knob 6. Lateral Rejecting Tray... -
Page 11: Control Panel Description
3. Control Panel Description START / STOP Used to resume or stop the counting operation. COUNT / BATCH Used to select the specific operating mode, either 1. COUNT or 2. BATCH. 1. COUNT mode (green LED on) The equipment counts all the coins deposited into the hopper continuously until the hopper is empty. - Page 12 3. Control Panel Description (cont.) 2. BATCH mode (green LED off, P appears on the screen) The user must press the BATCH button and set the desired number before beginning the count. The equipment will stop every time the specific batch quantity is reached. The top portion of the screen will show the number of coins counted, and the bottom portion will show the batch quantity set up by the operator.
- Page 13 3. Control Panel Description (cont.) ADD / LAST: ADD function is active when the green LED is on. In this mode, the equipment will add up every consecutive count to show the grand total. The total result is shown on the top portion of the screen. This applies to both COUNT and BATCH operational modes.
- Page 14 3. Control Panel Description (cont.) MEM: Used to retrieve two types of data from the unit’s memory: LAST count during the ADD operation (tapping MEM during the ADD operation). The screen shows "C xxx". Total coins counted since the last time the unit was powered on. The "ADD/LAST"...
-
Page 15: Operation
4. Operation Thickness and Diameter coin selectors Before beginning with the counting operation, the user must set up the specific thickness and diameter for the coin intended to count. - Page 16 4. Operation (cont.) Proceed to adjust the Thickness and the Diameter knobs considering this: a. The circular labels show the specific positions for USD coins (D-dimes / P-pennies / N-nickel / Q- quarter / $- $1 coin / H- half dollar). b.
-
Page 17: Basic Counting Operation
4. Operation (cont.) 4.1 Basic Counting Operation In this mode, the coins must be presorted by denomination before depositing them into the Hopper Tray. Using the DIAMETER and THICKNESS selectors the user must select the appropriate size of the coin. Coins that do not fit within the diameter and thickness specifications will not be counted. - Page 18 4. Operation (cont.) 4.1 Basic Counting Operation (cont.) Position the machine on a stable surface. Connect the unit to the electric outlet and turn it On using the power switch. Adjust both the Diameter and Thickness knobs to the exact position according to the coin’s size to count.
-
Page 19: Sorting / Counting
4. Operation (cont.) 4.2 Sorting / Counting The AB630 allows you to count mixed coins of different denominations (different sizes). This operating mode must be carried out by sorting the largest diameter coins first and separating the smaller diameter coins into a bag. Once done, the user must adjust now the next largest diameter, then pour rejected coins back into the hopper. - Page 20 4. Operation (cont.) 4.2 Sorting / Counting (cont.) 1. Ensure the lateral rejection tube and collecting bag are properly in place. 2. Adjust the Diameter and Thickness knobs according to the largest coin present in the bulk. The sorting procedure must start with the largest coin size and finish with the smallest coin size.
- Page 21 4. Operation (cont.) 4.2 Sorting / Counting (cont.) US coins must be sorted in the following order: Half dollar coins One-dollar coins Quarters Nickels Pennies Dimes...
-
Page 22: Packaging
4. Operation (cont.) 4.3 Packaging (with packaging tubes accessories, NOT INCLUDED) Coins can be packaged directly into coin wrappers following these instructions: 1. Choose the coin wrapper and plastic packaging tube according to the coin denomination to be counted. 2. Insert the coin wrapper into the packaging tube and place both beneath the unit’s coin exit. -
Page 23: Jamming
5. Jamming Facing a jamming event To ensure that the equipment operates with optimal performance as well as to prevent jamming, avoid the following: Counting bent or damaged coins or tokens Counting any type of foreign object like clips, staples, paper, nylon, rubber bands, etc. - Page 24 5. Jamming (cont.) Carefully take out the adjustment knob cover Pull up the conveyor belt mechanism as shown in Figures A and B Inspect the coin’s track and remove the jammed object Return the conveyor belt mechanism to its proper position Replace the adjustment knob cover...
-
Page 25: Routine Maintenance
6. Routine Maintenance To ensure an accurate and smooth count, and to extend the life of the unit, the following routine maintenance is recommended: 1. Turn the power switch OFF when the last count has been completed. 2. Clean the coin track and counting sensor surface. Remove the metallic debris that may be deposited during the counting operation. -
Page 26: Error Code Messages
7. Error Code Messages ERROR CAUSE SOLUTION Remove adjustment knob cover and remove jammed coins. Replace Coins are jammed near the the cover and press "C” counting sensor. to clear the error message and continue the count. Coin passed through the Press "C"... -
Page 27: Specifications
8. Specifications Temperature 32° - 104°F (0° - 40°C) Humidity 25% - 80% Display Sorting Type Manual Available Currency Universal incl. tokens Counting Speed (based on dimes) 2,200 coins / minute Hopper Capacity (based on dimes) 8,000 total Hopper Capacity (based on 50¢ USD) 1,500 total Power Source (INPUT) 110 VAC / 60 Hz or 220 VAC / 50 Hz... - Page 28 AccuBANKER 7104 NW 50th St Miami, FL 33166 9AM- 5PM ET Monday through Friday www.AccuBANKER.com Please give us a call at 1-888-993-2228...