Power Connection; Ethernet Connection - ZKTeco Green Label Elite Series Quick Start Manual

12 Power Connection

Recommended power supply: 12V - 3A
To share the power with other devices, use a power supply with higher current ratings.

13 Ethernet Connection

Connect the device and the system software over an Ethernet cable. An example is shown below:
Default IP Address
Subnet Mask : 255.255.255.0
Note: In LAN, IP addresses of the server (PC) and the device must be in the same network segment
when connecting to the ZKBioSecurity MTD software.
Click [Comm.] > [Ethernet] > [IP Address], enter the IP address and click [OK].
: 192.168.1.201 IP Address
Subnet Mask
9
12V 3A DC
: 192.168.1.130
: 255.255.255.0